- (Exam Topic 4)
Firewall polices must be configured to accept VRRP packets on the GAiA platform if it Firewall software. The Multicast destination assigned by the internet Assigned Number Authority (IANA) for VRRP is:

1. A. 224.0.0.18
2. B. 224 00 5
3. C. 224.0.0.102
4. D. 224.0.0.22

Correct Answer: A

- (Exam Topic 4)
Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new CPU to replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?

1. A. Go to clash-Run cpstop | Run cpstart
2. B. Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security Gateway
3. C. Administrator does not need to perform any tas
4. D. Check Point will make use of the newly installed CPU and Cores
5. E. Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security Gateway | Install Security Policy

Correct Answer: B

- (Exam Topic 4)
What are not possible commands to acquire the lock in order to make changes in Clish or Web GUI?

1. A. set config-lock on override
2. B. Click the Lock icon in the WebUI
3. C. "set rbac rw = 1''
4. D. lock database override

Correct Answer: C

- (Exam Topic 2)
When simulating a problem on ClusterXL cluster with cphaprob –d STOP -s problem -t 0 register, to initiate a failover on an active cluster member, what command allows you remove the problematic state?

1. A. cphaprob –d STOP unregister
2. B. cphaprob STOP unregister
3. C. cphaprob unregister STOP
4. D. cphaprob –d unregister STOP

Correct Answer: A
esting a failover in a controlled manner using following command;
# cphaprob -d STOP -s problem -t 0 register
This will register a problem state on the cluster member this was entered on; If you then run;
# cphaprob list
this will show an entry named STOP.
to remove this problematic register run following;
# cphaprob -d STOP unregister References:

- (Exam Topic 4)
You plan to automate creating new objects using new R81 Management API. You decide to use GAIA CLI for this task.
What is the first step to run management API commands on GAIA’s shell?

1. A. mgmt_admin@teabag > id.txt
2. B. mgmt_login
3. C. login user admin password teabag
4. D. mgmt_cli login user “admin” password “teabag” > id.txt

Correct Answer: B