- (Topic 3)
Using the output below:
Which of the following is the default gateway?
Correct Answer:
A
The default gateway is the IP address of the router or device that connects a network to another network or the internet. In the output below, the default gateway is 172.25.1.252, as shown in the line “Default Gateway . . . . . . . . . : 172.25.1.252”. The other IP addresses are not default gateways, but either local IP addresses (172.25.1.39 and 172.25.1.4) or subnet masks (255.255.255.0).
- (Topic 4)
A customer purchased an active touch pen for a tablet PC. After the customer used the pen for a few days, it stopped working. Which of the following is most likely causing the issue?
Correct Answer:
C
The most likely answer is C. The pen batteries need recharging.
An active touch pen is a stylus that uses a battery to power features such as pressure sensitivity, buttons, or Bluetooth connectivity. If the pen batteries are low or depleted, the pen may stop working or become inaccurate1. To fix this issue, you should recharge the pen batteries using the provided charger or cable, or replace them with new ones if they are not rechargeable1.
The other options are less likely to cause the issue. A scratched tablet screen may affect the touch sensitivity, but it should not affect the pen functionality. The pen software may need updating to improve performance or compatibility, but it should not stop the pen from working altogether. Software updates may disable the pen if they change the settings or drivers, but this can be fixed by re-enabling the pen or reinstalling the drivers2. References:
1: Troubleshoot your Surface Pen - Microsoft Support
2: Windows 10 touch screen: active pen works, finger does not - Super User
- (Topic 2)
A help desk technician has been tasked with installing an IP phone in a small office with an unmanaged switch. When connected to an RJ45 receptacle, the phone does not boot. Which of the following is the QUICKEST way to resolve this issue?
Correct Answer:
C
https://intellinetnetwork.eu/pages/what-is-a-poe-injector
The quickest way to resolve the issue is to install a Power over Ethernet (PoE) injector to provide power to the IP phone. An unmanaged switch does not provide PoE, so an injector is needed to power the phone.
- (Topic 1)
A technician needs to improve a workstation's overall response time for frequently used applications and data without removing the current hard drive. Which of the following storage devices should the technician install to BEST accomplish the objective?
Correct Answer:
A
Installing an M.2 SSD will improve a workstation's overall response time for frequently used applications and data without removing the current hard drive. M.2 drives are faster and more efficient than traditional hard drives, making them a good option for increasing overall performance. References: CompTIA A+ Certification Exam Core 1 Exam Objectives - 1.5 Given a scenario, configure storage devices and use appropriate media
- (Topic 4)
An administrator is using an RJ45 connector to terminate a network cable. Which of the following cables is the administrator terminating?
Correct Answer:
C
The correct answer is C. Cat 6.
An RJ45 connector is a standard type of physical connector for network cables. RJ45 connectors are used almost exclusively with Ethernet cables and networking1. Ethernet cables are twisted pair cables that carry data signals between devices on a network, such as computers, routers, switches, and servers2.
There are different categories of Ethernet cables, such as Cat 5, Cat 5e, Cat 6, and Cat 7, that have different specifications and performance levels. Cat 6 is one of the most common types of Ethernet cables, which supports data transfer speeds up to 10 Gbps and bandwidth up to 250 MHz3. Cat 6 cables have four pairs of copper wires, each with a plastic insulation and a foil or braided shield. The wires are twisted together to reduce crosstalk and interference4.
To terminate a Cat 6 cable, an administrator needs to use an RJ45 connector that matches the wiring scheme of the cable. There are two common wiring schemes for Ethernet cables: T568A and T568B. The administrator needs to strip the cable jacket, untwist the wires, arrange them in the correct order according to the chosen scheme, trim the excess wire, and insert them into the RJ45 connector. Then, the administrator needs to use a crimping tool to secure the wires and the connector4.
Optical cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit light signals, such as SC, ST, LC, or MTRJ connectors. Optical cables are used for fiber-optic networks that can carry data over long distances at high speeds.
Serial cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit serial data signals, such as DB9, DB25, or DE9 connectors. Serial cables are used for connecting devices that use serial communication protocols, such as modems, printers, scanners, or keyboards.
USB cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit universal serial bus data signals, such as USB-A, USB-B, USB-C, or Micro-USB connectors. USB cables are used for connecting devices that use USB communication protocols, such as flash drives, cameras, mice, or chargers.