An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements
Switch1 must retain the primary role if switch2 goes offline
Switch1 must retain the primary role until normal conditions are restored.
Switch1 and switch2 must ensure that the routing tables are converged before taking the active role
switch2 must retain the primary role if the default gateway is not reachable Drag and drop the configuration commands from the right to the left to meet the requirements. The commands
are used more than once Not all commands are used

Solution:


Does this meet the goal?

1. A. Yes
2. B. No

Correct Answer: A

Cisco Nexus 9000 Series Switches are configured with LACP protocol and default aging timers. What is the impact on the LACP peer during an ISSU upgrade?

1. A. The LACP peer connection terminates.
2. B. The LACP peer session remains up.
3. C. The LACP peer renegotiates the adjacency.
4. D. The LACP peer connection resets.

Correct Answer: B
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_ ISSU and ungraceful switchovers are not supported with LACP fast timers.

An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. The solution must meet these criteria:
The Recovery Point Objective must be 48 hours.
The backup must use encrypted transmission.
The Recovery Time Objective must be 4 hours.
Which configuration set must be used in the scheduled backup to meet these requirements?

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: D

Which two actions must be taken to directly connect a Fibre Channel storage array to a Cisco UCS domain? (Choose two.)

1. A. Configure a new VSAN
2. B. Create a new vHBA dedicated to the storage array
3. C. Configure a Fibre Channel port channel
4. D. Create a Storage Connection Policy
5. E. Configure the Fibre Channel poet as a Fibre Channel storage port

Correct Answer: AE

A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?

1. A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
2. B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
3. C. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80.
4. D. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80.

Correct Answer: D
Apply Both Direction and Reverse Filter Port in the subject for the filter. These two options are by default enabled...This means that if the provider EPG initiates traffic toward the consumer EPG, the Cisco ACI fabric allows it for any destination ports if the source port is 80. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/
b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html Reverse filter and apply in both directions is default.
If a filter allows traffic from any consumer port to a provider port (e.g. 8888), if reverse port filtering is enabled and the contract is applied both directions (say for TCP traffic), either the consumer or the provider can initiate communication. The provider could open up a TCP socket to the consumer using port 8888, whether the provider or consumer sent traffic first. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html