A datacenter technician is attempting to troubleshoot a server that keeps crashing. The server runs normally for approximately five minutes, but then it crashes. After restoring the server to operation, the same cycle repeats. The technician confirms none of the configurations have changed, and the load on the server is steady from power-on until the crash. Which of the following will MOST likely resolve the issue?
Correct Answer:
C
The most likely solution to resolve the issue of the server crashing after running normally for approximately five minutes is to reinstall the heat sink with new thermal paste. A heat sink is a device that dissipates heat from a component, such as a processor or a graphics card, by transferring it to a cooling medium, such as air or liquid. A heat sink is usually attached to the component using thermal paste, which is a substance that fills the gaps between the heat sink and the component and improves thermal conductivity. Thermal paste can degrade over time and lose its effectiveness, resulting in overheating and performance issues. If a server crashes after running for a short period of time, it may indicate that the processor is overheating due to insufficient cooling. To resolve this issue, the technician should remove the heat sink, clean the old thermal paste, apply new thermal paste, and reinstall the heat sink.
A server administrator is swapping out the GPU card inside a server. Which of the following actions should the administrator take FIRST?
Correct Answer:
C
The first action that the administrator should take before swapping out the GPU card inside a server is to shut down the server. This is to ensure that the server is not running any processes that might be using the GPU card, and to prevent any damage to the hardware or data loss due to sudden power loss. Shutting down the server also reduces the risk of electrostatic discharge (ESD) that might harm the components.Reference:https://pcgearhead.com/installing-a-new-gpu/
An administrator is rebooting servers manually after a group of updates were deployed through SCCM. The administrator notices several of the servers did not receive the deployed update. Which of the following should the administrator review first?
Correct Answer:
D
The first thing the administrator should check is whether the server is in the collection that was scheduled to receive the update through SCCM. A collection is a group of resources, such as computers or users, that can be managed as a single entity by SCCM. If the server is not in the collection, it will not receive the update. The other options are less likely to be the cause of the problem, as they would affect other aspects of the server’s functionality besides receiving updates. References: CompTIA Server+ Certification Exam Objectives, Domain 5.0: Security, Objective 5.4: Given a scenario, apply patches/updates and validate their installation.
A server technician is placing a newly configured server into a corporate environment. The server will be used by members of the accounting department, who are currently assigned by the VLAN identified below:
Which of the following IP address configurations should the technician assign to the new server so the members of the accounting group can access the server?
Correct Answer:
A
The IP address configuration that the technician should assign to the new server so the members of the accounting group can access the server is 172.16.25.90/24 for the IP address and 172.16.25.254 for the default gateway. This configuration matches the VLAN identified in the image, which has a network address of 172.16.25.0/24 and a subnet mask of 255.255.255.0. The IP address of the server must be within the same network range as the VLAN, which is from 172.16.25.1 to 172.16.25.254, excluding the network and broadcast addresses (172.16.25.0 and 172.16.25.255). The default gateway of the server must be the same as the VLAN, which is 172.16.25.254, to allow communication with other networks or devices outside the VLAN. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.1: Given a scenario, configure network settings for servers.
A technician needs to provide a VM with high availability. Which of the following actions should the technician take to complete this task as efficiently as possible?
Correct Answer:
B
Cloning the original VM is the most efficient way to provide a VM with high availability. Cloning is the process of creating an exact copy of a VM, including its configuration, operating system, applications, and data. A cloned VM can be used as a backup or a replica of the original VM, and can be powered on and run independently. Cloning can be done quickly and easily using vSphere tools or other third-party software. By cloning the original VM and placing it on a different host server or availability zone, the
technician can ensure that if the original VM fails, the cloned VM can take over its role and provide uninterrupted service to the users and applications.