Refer to the exhibit.

A network operator is attempting to configure an IS-IS adjacency between two routers, but the adjacency cannot be established. To troubleshoot the problem, the operator collects this debugging output. Which interface are misconfigured on these routers?

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: B

A network engineer must implement SNMPv2 with these parameters
Enable SNMP community string C1sc0 with read-only permissions.
Enable interface index persistence.
Restrict the SNMP community to only the monitoring server with IP address 198.18 19 100/32.
Provide view-only access to ospflfEntry and ospfNbrEntry.
Which configuration must the engineer apply?

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: A

A network operator working for a private outsourcing company with an employee id: 4261:72:778 needs to limit the malicious traffic on their network. Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernet0/1 interface?

1. A. router(config)# interface gigabitethernet0/1router(config-if)# ip address 192.168.200.1 255.255.255.0 router(config-if)# ip verify unicast source reachable-via anyrouter(config-if)# ipv6 address 2001:DB8:1::1/96 router(config-if)# ipv6 verify unicast source reachable-via any
2. B. router(config)# interface gigabitethernet0/1router(config-if)# ip address 192.168.200.1 255.255.255.0 router(config-if)# ip verify unicast source reachable-via rx router(config-if)# ipv6 address 2001:DB8:1::1/96 router(config-if)# ipv6 verify unicast source reachable-via rx
3. C. router(config)# interface gigabitethernet0/1router(config if)# ip address 192.168.200.1 255.255.255.0 router(config-if)# ip verify unicast source reachable-via rx router(config-if)# ipv6 address 2001:DB8:1::1/96 router(config-if)# ipv6 verify unicast source reachable-via any
4. D. router(config)# interface gigabitethernet0/1router(config-if)# ip address 192.168.200.1 255.255.255.0 router(config-if)# ip verify unicast source reachable-via any router(config-if)# ipv6 address 2001:DB8:1::1/96 router(config-if)# ipv6 verify unicast source reachable-via rx

Correct Answer: A

A network administrator is planning a new network with a segment-routing architecture using a distributed control plane. How is routing information distributed on such a network?

1. A. Each segment is signaled by a compatible routing protocol, and each segment makes its own steering decisions based on SR policy.
2. B. Each segment is signaled by MPLS, and each segment makes steering decisions based on the routing policy pushed by BGP.
3. C. Each segment is signaled by an SR controller, but each segment makes its own steering decisions based on SR policy.
4. D. Each segment is signaled by an SR controller that makes the steering decisions for each node.

Correct Answer: D

Which two routing protocols support Cisco MPLS TE tunnels? (Choose two.)

1. A. IS-IS
2. B. RIP
3. C. BGP
4. D. OSPF
5. E. EIGRP

Correct Answer: AD